12. September 2018

The expert removal of a defective Cylinder-head Gasket and the successful installation of a new one isn’t an easy part when it comes to engine repairs. This video shows the necessary step-by-step work processes – from removing the cylinder-head and cleaning the sealing surfaces, to tightening the new cylinder-head bolts.

04. July 2017

Shaping the future with innovative strength As one of the world’s 20 largest suppliers and a development partner to the automotive industry, MAHLE offers innovative mobility solutions that stand for clean air, fuel efficiency, and driving pleasure.

03. July 2017

Goetze is one of the longest established names in automotive, delivering technically advanced components that significantly lower oil consumption and reduce emissions.

02. July 2017

Piston pins should not be hammered into pin hole Piston rings should not be mounted by hand, always use a good quality ring installing tool/expander While finally installing the piston & ring assembly in the cylinder, care should be taken that the ring gaps are not aligned and are at equal angles with respect to each other Make sure to sufficiently lubricate the piston/ring while inserting in bore, this is required for initial lubrication Use a good quality ring compressor while fitting the...

01. July 2017

The exciting and emotional motor sports season 2016, with the VLN race and the 24-hour race at the Nürburgring has shown us that MANN-FILTER and motor sports is a perfect match.